Shanghai Saferlifts internal combustion forklift
Shanghai Saferlifts internal combustion forklift
An internal combustion forklift is a forklift that uses diesel, gasoline or liquefied petroleum gas as fuel and is powered by an engine. The load capacity is 0.5 tons - 45 tons. Generally divided into: counterbalanced internal combustion forklift, container forklift (front lift), side forklift.
Category editing
Generally divided into three categories:
1. Balanced heavy internal combustion forklift
Generally used diesel, gasoline, liquefied petroleum gas fuel, load capacity of 0.5 tons - 45 tons, more than 10 tons of diesel forklifts.
2. Container forklift (front lift)
Using a diesel engine as a power, it is a crane used to load and unload containers. The carrying capacity is 45 tons.
3.Shanghai Saferlifts side forklift
The diesel engine is used as the power, and the carrying capacity is 3.0 to 6.0 tons. The fork is mounted on the side of the forklift and has the ability to fork the cargo directly from the side, so it is mainly used to fork long strips of goods, such as wood strips, steel bars, etc.
Feature editing
1. Shanghai Saferlifts counterbalanced diesel forklifts are large in size, but their stability is good, suitable for heavy loads, and the use time is unlimited. The use site is generally outdoors. Compared with gasoline engines, diesel engines have better power (low speed is not easy to extinguish, overload capacity, long-term operation ability), fuel cost is low, but vibration is large, noise is large, exhaust volume is large, self-important, high price, load The amount can range from 0.5 tons to 45 tons.
2. Balanced heavy-duty gasoline forklifts are large in size, but their stability is good, suitable for heavy loads, and the use time is unlimited. The use of the site is generally outdoors. Gasoline engine has small shape, light weight, large output power, low noise and vibration, and low price. However, gasoline engine overload capacity and long-term operation ability are relatively poor, and fuel cost is quite high. The load can be 0.5 to 4.5 tons.
3. The LPG Shanghai Saferlifts (LPG Shanghai Saferlifts) is a liquefied petroleum gas conversion device installed on a counterbalanced gasoline forklift. It becomes an LPG forklift and can be switched between gasoline and liquefied gas through a transfer switch. The biggest advantage of LPG forklift is that the exhaust gas is good, the carbon monoxide (CO) emission is significantly less than that of the gasoline engine, and the fuel cost is low (15KG liquefied gas is equivalent to 20 liters of gasoline), which is suitable for indoor work with high environmental requirements.
Design ideas
After the evolution of the world forklift, after the traditional mechanical transmission method, it has been divided into two design ideas, each of which has their advantages and disadvantages, as follows:
The mechanical transmission method is inconvenient to operate, and the driver's operation is highly fatigued, and the customer has rarely used it.
Torque converter drive: engine---hydraulic torque converter---automatic gearbox, the basic principle is equivalent to the use of AT gearbox for passenger cars, is a newer transmission mode, with the advantage of simple operation, but The power loss during the transmission process is large.
Hydrostatic transmission: engine---hydraulic pump---hydraulic motor. There are no torque converters, clutches, gearboxes, fewer components, lower vehicle failure rates and maintenance costs.
More information of Shanghai Saferlifts Machinery Co.,ltd .pls visit:
www.saferlifts.com phone: 86 18149721228 (whatsapp) 021 51043313 Tell
Email: bruce@saferlifts.com
评论
发表评论